Raptor system

 
Raptor really takes tank gauging to another level, making you better equipped to handle the ever-increasing demands on efficiency, safety and accuracy. It is a complete and flexible tank gauging system, based on the open industry standard FOUNDATION™ fieldbus. Raptor can be used for refineries, tank terminals and in the petrochemical industry. It is the accurate system for custody transfer, process control, inventory control or for filling a tank without risk of overflow. The system can be designed for SIL 3 safety. The system includes cost-effective alternatives for each performance class. It can be configured with:
• Highest accuracy for custody transfer/inventory control or
• Medium accuracy required primarily for operational control
 
5900S with Horn Antenna
Rosemount 5900S with Horn Antenna is used on 200 mm (8-in.) or larger nozzles on fixed roof tanks.
5900S with LPG/LNG Antenna
Rosemount 5900S with an LPG/LNG antenna is installed in a still-pipe and measures the level of liquefied gas. It is rated up to 40 bar (600 psi) and is designed to operate in a wide temperature range; -170 to 90 °C (-274 to 194 °F) in tank.
5900S with Parabolic Antenna
Rosemount 5900S with a parabolic antenna is used for measurements in both fixed and floating roof tanks. The antenna design provides high gain and signal to noise ratio, suitable for measurements on bitumen, asphalt, condensing and sticky products.
5900S with Still-pipe Array Antenna
Rosemount 5900S with an array antenna is used in existing still-pipes. Typical applications include crude oil tanks with floating roofs, and gasoline / product tanks with or without inner floating roofs. Two versions are available, fixed and inclined.
Rosemount 5300 for Operational Control
Rosemount 5300 is a premium 2-wire guided wave radar transmitter for level measurements on liquids, to be used in a wide range of medium accuracy applications under various tank conditions.
Rosemount 5400 for Operational Control
Rosemount 5400 is a reliable 2-wire non-contact radar level transmitter for liquids, to be used in a wide range of medium accuracy applications under various tank conditions.
Rosemount 2240S Multi-input Temperature Transmitter
The ultra-stable high performance 2240S Multi-input Temperature Transmitter is approved for demanding custody transfer applications, which require very accurate level and temperature measurements for net standard volume calculations.
Rosemount 565/566 Multiple Spot or Average Temperature Sensor
A number of spot elements are placed at different heights to provide a tank temperature profile and an average temperature. Only fully immersed elements are used to determine product temperature. The MST can be integrated with a water level sensor.
Rosemount 644 Temperature Transmitter with 65 Single Point Sensor
Single point temperature sensors are used in applications with lower requirements on volume measurements, or when it is not possible to use a multiple spot temperature sensor due to installation restrictions.
Rosemount 765 Multiple Spot Temperature and Water Level Sensor
The water level sensor is used to determine the water content in a tank. At the bottom of an oil storage tank there is water and by measuring the water level it is possible to calculate the correct product volume in the tank.
3051S Pressure Transmitter
Rosemount 3051S is the standard pressure transmitter supplied with the Raptor system for in-liquid mounting. It has an industry leading performance with 0.025% accuracy.
2120 and 2160 Alarm Switches
Rosemount 2120 for fixed roofs, is used when a separate alarm switch is required to prevent overfill situations. There is also a wireless version available, Rosemount 2160.
2160 Field Communication Unit
Rosemount 2160 Field Communication Unit polls data from field devices via the 2410 hub and stores the values in a buffer memory. When a request for data is received, the it can send data from up to 32 tanks.
2165/2175 Field Communication Unit
Rosemount 2165/2175 Field Communication Unit is a data concentrator that continuously polls data from field devices from different vendors, 2410 tank hubs, other field communication units, Enraf CIU:s etc and stores data in a buffer memory.
2180 Field Bus Modem
Rosemount 2180 Field Bus Modem is required for connecting the field bus to the control room TankMaster PC. The PC connection can either be RS232 or USB.
2230 Graphical Field Display
Rosemount 2230 presents inventory tank gauging data such as level, temperature, and pressure. This backlit user-friendly display is designed for tough environments, and can be installed in hazardous areas, on the tank roof or at the foot of the tank.
2410 Tank Hub
Rosemount 2410 is handling communication between the field devices and the control room. It is available in two versions, for single or multiple tanks. It also feeds power to the units on the Tankbus.